3 description of the function keys, Description of the function keys, Parameter setting – Lenze ECSCAxxx User Manual
Page 153
Parameter setting
Parameter setting with the XT EMZ9371BC keypad
Description of the function keys
l
153
EDBCSXA064 EN 3.2
7.3.3
Description of the function keys
)
Note!
Key combinations with
T:
Press
T and keep it pressed, then press second key in addition.
Key
Function
Menu level
1)
Code level
Parameter level
Operating level
V
Change to parameter
level
Change to operating
level
Change to code level
T V
Load predefined
configurations in the
menu "Short setup"
2)
Accept parameters
when SHPRG
p or
SHPRG is displayed
z
y
Change between menu
items
Change code number
Change figure over
cursor
T z
T y
Quick change between
menu items
Quick change of code
number
Quick change of figure
over cursor
Z
Change between main menu, submenus and
code level
Cursor to the right
Y
Cursor to the left
U
Cancel function of
S key, the LED in the key goes out.
S
Inhibit the controller, LED in the key lights up.
Reset fault (TRIP reset):
1. Remove cause of malfunction
2. Press
S
3. Press
U
1)
No menu for ECSxE power supply module
2)
Only active when operating Lenze devices of the 8200 vector or 8200 motec series.