Apple Shake 4 - Manual (Page 279)

Chapter 9 Using the Audio Panel 279
To load an audio file into a script:
1 Open the Audio Panel.
2 In the Audio Panel, click the Open Audio File button.
3 In the Select Audio File window, select the audio file(s) you wish to import, then click OK.
Note: You can also double-click an audio file to import it.
The audio file appears in the audio track list, at the top of the Audio Panel. You can
import several audio files into your script—they all appear in this list.
Details about the selected audio file appear in the audio track list.
The path to the originating media file on disk appears in the File Name area.
If an audio file is on an offline server or drive when a script is loaded, that audio file
becomes unlinked, appearing red in the sound file list. Once the server or drive is
online, you can use the Refresh command to reload the audio file. You can also use the
Refresh control to update an audio file in your script that you’ve made changes to,
simultaneous to it’s being used by Shake.
To refresh a sound file used by a script:
m Click the Refresh button.