Allied Telesis AT-S100 - Manual (Page 98)

Chapter 3: Privileged Executive Mode Commands
98 Section I: Command Modes
SHOW MAC ADDRESS-TABLE INTERFACE
Syntax
show mac address-table interface ge<1-28>
Parameters
interface Specifies the name of an interface. There are 28 ports on
the 9000/28 and 9000/28SP switches. To specify a port,
precede the port number with “ge.”
Description
Use the SHOW MAC ADDRESS-TABLE INTERFACE command to
display the status of the static and dynamic MAC addresses assigned to a
port.
For procedures to configure and display the MAC addresses, see
“Displaying and Setting MAC Addresses” on page 32.
Command Mode
Privileged Executive mode
Example
The following command displays the settings of the MAC address table on
port 3:
switch#show mac address-table interface ge3