Allied Telesis AT-S100 - Manual (Page 110)

Chapter 3: Privileged Executive Mode Commands
110 Section I: Command Modes
SHOW USER-PRIORITY
Syntax
show user-priority interface INTERFACE
Parameters
IFNAME Specifies the name of an interface. There are 28 ports on
the AT-9000/28 and AT-9000/28SP switches. To specify
a port, precede the port number with “ge.”
Description
Use the SHOW USER-PRIORITY command to display the user priority
value on the specified port.
Command Mode
Privileged Executive mode
Example
The following command displays the user-priority value on port 8:
switch#show user-priority interface ge8
The following is an example display:
Default user priority: 7
Related Commands
“USER-PRIORITY” on page 193