Allied Telesis AT-S100 - Manual (Page 134)

Chapter 4: Configuration Terminal Mode Commands
134 Section I: Command Modes
IP SSH VERSION
Syntax
ip ssh version 1|2
no ip ssh version 1|2
Parameters
version Indicates the SSH version number. Choose from the
following options:
1 Specifies SSH version 1.
2 Specifies SSH version 2.
Description
Use the IP SSH VERSION command to set the SSH protocol version
number.
Use the no form of this command to set the SSH version number to its
default value.
Command Mode
Configuration Terminal mode
Example
The following commands set the switch to SSH version 2:
switch#configure terminal
switch(config)#ip ssh version 2
Related Commands
“IP SSH RSA KEYPAIR-NAME” on page 133