Allied Telesis AT-S100 - Manual (Page 207)

AT-S100 Management Software User’s Guide
Section II: Advanced Configuration 207
SHOW DOT1X INTERFACE
Syntax
show dot1x interface IFNAME
Parameters
IFNAME Specifies the name of an interface. There are 28 ports on
the AT-9000/28 and AT-9000/28SP switches. To specify
a port, precede the port number with “ge.”
Description
Use this command to display the state of a particular interface.
To modify the lines displayed, use the | (output modifier token); to save the
output to a file, use the > (output redirection token).
Command Mode
Privileged Executive mode
Example
The following command displays the state of interface 6.
switch# show dot1x interface ge6
See Figure 25 for a sample display.
Figure 25. SHOW DOT1X INTERFACE Command
(switch3)#show dot1x interface
% 802.1X info for interface xe6
% portEnabled: true - portControl: Force Unauthorized
% portStatus: Unauthorized - currentId: 2
% reAuthenticate: disabled
% reAuthPeriod: 3600
% abort:F fail:F start:F timeout:F success:F
% PAE: state: Force Unauthorized - portMode: Force Unauthorized
% PAE: reAuthCount: 1 - rxRespId: 0
% PAE: quietPeriod: 60 - reauthMax: 2 - txPeriod: 30
BE: state: Idle - reqCount: 0 - idFromServer: 0
BE: suppTimeout: 30 - serverTimeout: 30 - maxReq: 2
CD: adminControlledDirections: in - operControlledDirections: in
CD: bridgeDetected: false
KR: rxKey: false
KT: keyAvailable: false - keyTxEnabled: falseExample