Allied Telesis AT-S100 - Manual (Page 202)

Chapter 6: 802.1x Access Control Commands
202 Section II: Advanced Configuration
RADIUS-SERVER KEY
Syntax
radius-server key KEY
no radius-server key KEY
Parameters
KEY The secret key shared among the radius server and the 802.1x
client. Special characters such as “*,” “_,” and “!” are permitted.
Description
Use the RADIUS-SERVER KEY command to set the shared secret key
between a Radius server and a client. This command has no default
value.
To erase the current value of the secret key, use the no form of this
command.
Command Mode
Configure mode
Example
The following commands set the shared secret key to “ketzel24:”
switch# configure terminal
switch(config)# radius-server key ketzel24
Related Commands
“RADIUS-SERVER HOST” on page 201