Allied Telesis AT-S100 - Manual (Page 102)

Chapter 3: Privileged Executive Mode Commands
102 Section I: Command Modes
SHOW MAC ADDRESS-TABLE VLAN
Syntax
show mac address-table vlan <1-4094>
Parameters
vlan Specifies a VLAN ID. Enter a value between 1 and 4094.
Description
Use the SHOW MAC ADDRESS-TABLE VLAN command to display the
status of both the static and dynamic MAC addresses assigned to the
switch.
For procedures to configure and display the MAC addresses, see
“Displaying and Setting MAC Addresses” on page 32.
Command Mode
Privileged Executive mode
Example
The following command displays the MAC address configuration on
VLAN 1:
switch#show mac address-table vlan 1
See Figure 8 on page 103 for a sample display.