Allied Telesis AT-S100 - Manual (Page 227)

Section II: Advanced Configuration 227
Chapter 9
Simple Network Management Protocol
(SNMP) Commands
This chapter provides descriptions of SNMP v1 and v2c commands that
are accessed through the Configuration Terminal mode.
This chapter contains the following commands:
ˆ “SNMP-SERVER COMMUNITY” on page 228
ˆ “SNMP-SERVER CONTACT” on page 230
ˆ “SNMP-SERVER ENABLE” on page 232
ˆ “SNMP-SERVER GROUP” on page 233
ˆ “SNMP-SERVER HOST” on page 235
ˆ “SNMP-SERVER USER” on page 237
ˆ “SNMP-SERVER USER REMOTE” on page 239
ˆ “SNMP-SERVER VIEW” on page 241