Allied Telesis AT-S100 - Manual (Page 179)

AT-S100 Management Software User’s Guide
Section I: Command Modes 179
SHOW RUNNING-CONFIG INTERFACE
Syntax
show running-config interface INTERFACE
Parameters
INTERFACE Indicates the interface or a list of interfaces. An
interface list can consist of a port.
Note
Do not mix interface types in a list. Also, the specified interfaces
must exist.
Description
Use the SHOW RUNNING-CONFIG INTERFACE command to display the
current configuration of one or more interfaces on the device.
Command Mode
All modes
Examples
To display the status of the SHOW RUNNING-CONFIG INTERFACE
command on port 4:
switch#show running-config interface ge4
See Figure 21 for an example display.
Figure 21. SHOW RUNNING-CONFIG INTERFACE Port Example
To display the status of the current running configuration of a switch for
VLAN 2:
switch#show running-config interface vlan2
(switch3)# show running-config interface ge4
!
interface ge4
static channel-group 3