Allied Telesis AT-S100 - Manual (Page 101)

AT-S100 Management Software User’s Guide
Section I: Command Modes 101
See Figure 7 for an example display.
Figure 7. SHOW MAC ADDRESS-TABLE STATIC
The fields in Figure 8 are defined in the following list:
ˆ vlan. This field indicates the VLAN ID.
ˆ MAC Address. This field indicates the MAC address in the format:
HHH.HHH.HHH.
ˆ Type. This field indicates a static or dynamic MAC address.
ˆ Ports. This field indicates the name of the port.
ˆ Forward. This field indicates if data is forwarded to a MAC address or
not. A value of 1 indicates data is forwarded to a MAC address. A
value of 0 indicates that data is discarded and is not forwarded to a
MAC address.
Related Commands
“SHOW MAC ADDRESS-TABLE” on page 92
“SHOW MAC ADDRESS-TABLE AGEING-TIME” on page 94
“SHOW MAC ADDRESS-TABLE DYNAMIC” on page 96
“SHOW MAC ADDRESS-TABLE INTERFACE” on page 98
“SHOW MAC ADDRESS-TABLE VLAN” on page 102
(switch3)# show mac address-table static
Mac Address Table
---------------------------------------------------------------
Vlan
MAC Address Type Ports Forward
---- ----------- ---- ----- -------
1 0100.5e7f.fffa STATIC ge3 1
(switch3)#