beautypg.com

Mac address-table ageing-time – Allied Telesis AT-S100 User Manual

Page 138

background image

Chapter 4: Configuration Terminal Mode Commands

138

Section I: Command Modes

MAC ADDRESS-TABLE AGEING-TIME

Syntax

mac address-table ageing-time <10-1000000>

no mac address-table ageing-time

Parameters

ageing-time

Indicates the ageing time in seconds. Choose a value

between 10 and 1,000,000 seconds. The default is
300 seconds.

Description

Use the MAC ADDRESS-TABLE AGEING-TIME command to specify the
ageing time for an entry in a MAC address table. Use the no form to reset
this parameter.

For procedures to configure and display the MAC addresses, see
“Displaying and Setting MAC Addresses” on page 32.

Command Mode

Configuration Terminal mode

Examples

The following example sets the ageing time to 120 seconds:

switch# configure terminal

switch#(config)# mac address-table ageing-time 120

Related Commands

“MAC ADDRESS-TABLE AGEING-TIME” on page 138

“MAC ADDRESS-TABLE STATIC DISCARD” on page 139

“MAC ADDRESS-TABLE STATIC FORWARD” on page 141