Allied Telesis AT-S100 - Manual (Page 151)

AT-S100 Management Software User’s Guide
Section I: Command Modes 151
SHOW LIST
Syntax
show list
Parameters
none
Description
Use the SHOW LIST command to display a list of all the commands
available in the current mode.
The display of the SHOW LIST command is often more than one page. To
advance the display to the next line, press ENTER. To advance the
display to the next page, press ESC.
Command Mode
All modes
Example
Use the following commands to display the commands available in the
current mode:
switch#configure terminal
switch#show list
See Figure 14 on page 152 for a sample display of the SHOW LIST
command in the Privileged Executive mode.