Allied Telesis AT-S100 - Manual (Page 96)

Chapter 3: Privileged Executive Mode Commands
96 Section I: Command Modes
SHOW MAC ADDRESS-TABLE DYNAMIC
Syntax
show mac address-table dynamic |
begin|exclude|include|redirect
Parameters
dynamic Indicates the dynamic MAC addresses.
| Specifies output variables. Choose from the
following options:
begin Indicates to begin with a line that
matches.
exclude Specifies to exclude lines that match.
include Specifies to include lines that match.
redirect Indicates to redirect the output.
Description
Use the SHOW MAC ADDRESS-TABLE DYNAMIC command to display
the status of the static and dynamic MAC addresses assigned to the
switch.
For procedures to configure and display the MAC addresses, see
“Displaying and Setting MAC Addresses” on page 32.
Command Mode
Privileged Executive mode
Example
The following command displays the dynamic MAC addresses:
switch#show mac address-table dynamic