Allied Telesis AT-S100 - Manual (Page 269)

AT-S100 Management Software User’s Guide
Section II: Advanced Configuration 269
VLAN DATABASE
Syntax
vlan database
Parameters
none
Command Mode
Configuration Terminal mode
Description
Use the VLAN DATABASE command to enter the VLAN configuration
mode. After you enter the VLAN mode, the prompt changes to indicate the
new mode and you can enter commands to add, delete, or modify values
associated with a single VLAN.
Example
The following commands permits access to the VLAN Configuration mode
and displays the new prompt that indicates the new mode:
switch# configure terminal
switch(config)# vlan database
switch(config-vlan)#
Related Commands
“VLAN” on page 267