Allied Telesis AT-S100 - Manual (Page 143)

AT-S100 Management Software User’s Guide
Section I: Command Modes 143
MLS QOS
Syntax
mls qos <0-10> <0-7>|<0-10> <0-7>|<0-10> <0-7>|
<0-10> <0-7>|<0-10> <0-7>|0-10> <0-7>|<0-10> <0-7>|<0-
10> <0-7>|
Parameters
<0-10> Specifies the weight for queue 0, where 0 indicates strict
priority.
<0-7> Specifies the priority for queue 0, where 0 indicates strict
priority.
<0-10> Specifies the weight for queue 1, where 0 indicates strict
priority.
<0-7> Specifies the priority for queue 1, where 0 indicates strict
priority.
<0-10> Specifies the weight for queue 2, where 0 indicates strict
priority.
<0-7> Specifies the priority for queue 2, where 0 indicates strict
priority.
<0-10> Specifies the weight for queue 3, where 0 indicates strict
priority.
<0-7> Specifies the priority for queue 3, where 0 indicates strict
priority.
<0-10> Specifies the weight for queue 4, where 0 indicates strict
priority.
<0-7> Specifies the priority for queue 4, where 0 indicates strict
priority.
<0-10> Specifies the weight for queue 5, where 0 indicates strict
priority.
<0-7> Specifies the priority for queue 5, where 0 indicates strict
priority.
<0-10> Specifies the weight for queue 6, where 0 indicates strict
priority.