Allied Telesis AT-S100 - Manual (Page 17)

AT-S100 Management Software User’s Guide
17
Figure 1. AT-S100 Command Modes
See Table 1 for information about the commands used to access the
modes and their respective prompts.
Privileged
Executive
mode
Configuration
Terminal
mode
Line
mode
Interface
Configuration
mode
VLAN
Configuration
mode
configure
terminal
Command used to
enter the next mode
1221
VLAN
database
interface
IFNAME
line vty [FIRST]
(LAST)
Commands used to
enter the next mode
Table 1. Command Modes
Command
Mode
Prompt Description
Privileged
Executive
Mode Switch# ˆ This is the default command mode for the manager
login.
ˆ Enter the EXIT or LOGOUT commands to exit the
management session.
Configuration
Terminal Mode Switch(config)# ˆ Use the CONFIGURE command to enter this mode
from the Privileged Executive mode.
ˆ To return to the Privileged Executive mode, enter
the EXIT command.