beautypg.com

Enable secret – Allied Telesis AT-S100 User Manual

Page 125

background image

AT-S100 Management Software User’s Guide

Section I: Command Modes

125

ENABLE SECRET

Syntax

enable secret (8) LINE

Parameters

8

Specifies a hidden password will follow. This is an optional

parameter.

LINE

Specifies a password for the Privileged Executive Mode. Enter

an alphanumeric value.

Description

Use the ENABLE SECRET command to assign a privileged-level
password, or secret. By default, there is no secret assigned. For
information about the Privileged Executive mode commands, see
“Privileged Executive Command Mode” on page 18.

Command Mode

Configuration Terminal mode

Example

The following command assigns “aloha5551212” as the hidden password:

switch#configure terminal

switch(config)#enable secret 8 aloha5551212

Related Commands

“ENABLE PASSWORD” on page 124