Allied Telesis AT-S100 - Manual (Page 203)

AT-S100 Management Software User’s Guide
Section II: Advanced Configuration 203
SHOW DOT1X
Syntax
show dot1x
Parameters
none
Description
Use this command to display the status of the 802.1x feature on the
switch.
To modify the lines displayed, use the | (output modifier token); to save the
output to a file, use the > (output redirection token).
Command Mode
Privileged Executive mode
Example
The following example shows the SHOW DOT1X command and the
resulting display:
switch#show dot1x
See Figure 23 for a sample display.
Figure 23. SHOW DOT1X Command
Related Commands
“SHOW DOT1X ALL” on page 204
“SHOW DOT1X INTERFACE” on page 207
switch# show dot1x
% 802.1x authentication enabled
% Raduis server address: 192.168.1.1.1812
% Radius client address: dhcp128.ipinfusion.com.12103
% Next radius message id: 0