Allied Telesis AT-S100 - Manual (Page 81)

AT-S100 Management Software User’s Guide
Section I: Command Modes 81
COPY
Syntax
copy running-config startup-config
Parameters
running-config Indicates the running configuration file.
startup-config Indicates the start-up configuration file.
Description
Use the COPY command to save your current configuration to the start-up
configuration file, called “startup-config,” on the switch.
Command Mode
Privileged Executive mode
Examples
In the following example, the running configuration file is copied to the
startup configuration file which is named “startup-config:”
switch#copy running-config startup-config
The software displays the following:
Building configuration...
[OK]
Enter the abbreviated form of the COPY command to save the current
configuration on the switch to the start-up configuration file called “startup-
config:”
switch# copy run start
The software displays the following:
Building configuration...
[OK]
Related Commands
“CP” on page 86