Allied Telesis AT-S100 - Manual (Page 205)

AT-S100 Management Software User’s Guide
Section II: Advanced Configuration 205
Table 7 provides a description of the parameters of the SHOW DOT1X
ALL and SHOW DOT1X INTERFACE commands.
Table 7. SHOW DOT1X Parameter Description
Parameter Description
portEnabled Indicates the interface operational status (up-
true/down-false).
portControl Indicates the current control status of the port
for 802.1x control.
portStatus Indicates the 802.1x status of the port
(authorized or unauthorized).
reAuthenticate Indicates the status of reauthentication on an
interface.
reAuthPeriod Indicates the time period of reauthentication.
Supplicant PAE related global variables:
abort Indicates that authentication should be aborted
when this variable is set to true.
fail Indicates failed authentication attempt when
this variable is set to false.
start Indicates authentication should be started
when this variable is set to true.
timeout Indicates an authentication attempt timed out
when this variable is set to true.
success Indicates authentication is successful when
this variable is set to true.
PAE: state Current 802.1x operational state of the interface
mode Indicates the mode is set to 802.1x.
reAuthMax Indicates the maximum number of
reauthentication attempts.
BE Backend Authentication state
state Indicates the status of the state machine.
reqCount Indicates the number of requests sent to the
server.
suppTimeout Indicates the supplicant timeout period.
serverTimeout Indicates the server timeout period.