Allied Telesis AT-S100 - Manual (Page 209)

AT-S100 Management Software User’s Guide
Section II: Advanced Configuration 209
SHOW DOT1X STATISTICS INTERFACE
Syntax
show dot1x statistics interface IFNAME ge<1-28>
Parameters
IFNAME Specifies the name of an interface. There are 28 ports on
the AT-9000/28 and AT-9000/28SP switches. To specify
a port, precede the port number with “ge.”
Description
Use the SHOW DOT1X STATISTICS INTERFACE command to display
the vital statistics of an interface.
To modify the lines displayed, use the | (output modifier token); to save the
output to a file, use the > (output redirection token).
Command Mode
Privileged Executive mode
Example
The following command displays the statistics for interface 5:
switch# show dot1x statistics interface ge5
See Figure 26 for a sample display.
Figure 26. SHOW DOT1X INTERFACE Command
Related Commands
“SHOW DOT1X” on page 203
(switch3)#show dot1x interface
% Dot1x statistics for interface xe5 - 3
% EAPOL Frames Rx: 0 - EAPOL Frames Tx: 0
% EAPOL Start Frames Rx: 0 - EAPOL Logoff Frames Rx: 0
% EAP Rsp/Id Frames Rx: 0 - EAP Response Frames Rx: 0
% EAP Req/Id Frames Tx: 35 - EAP Request Frames Tx: 0
% Invalid EAPOL Frames Rx: 0 - EAP Length Error Frames Rx: 0
% EAPOL Last Frame Version Rx: 0 - EAPOL Last Frame Src:
0000.0000.0000