Allied Telesis AT-S100 - Manual (Page 93)

AT-S100 Management Software User’s Guide
Section I: Command Modes 93
See Figure 3 for an example display.
Figure 3. SHOW MAC ADDRESS-TABLE Command
The fields in Figure 3 are defined in the following list:
ˆ vlan. This field indicates the VLAN ID.
ˆ MAC Address. This field indicates the MAC address in the format:
HHH.HHH.HHH.
ˆ Type. This field indicates a static or dynamic MAC address.
ˆ Ports. This field indicates the name of the port.
ˆ Forward. This field indicates if data is forwarded to a MAC address or
not. A value of 1 indicates data is forwarded to a MAC address. A
value of 0 indicates that data is discarded and is not forwarded to a
MAC address.
Related Commands
“SHOW MAC ADDRESS-TABLE AGING-TIME” on page 94
“SHOW MAC ADDRESS-TABLE DYNAMIC” on page 96
“SHOW MAC ADDRESS-TABLE INTERFACE” on page 98
“SHOW MAC ADDRESS-TABLE STATIC” on page 100
“SHOW MAC ADDRESS-TABLE VLAN” on page 102
(switch3)# show mac address-table
Mac Address Table
---------------------------------------------------------------
Vlan
MAC Address Type Ports Forward
---- ----------- ---- ----- -------
1 0100.5e7f.fffa STATIC ge1 1
1 0000.cd14.6448 DYNAMIC ge1 1
1 0000.f4d8.3534 DYNAMIC ge1 1
1 0004.5a5e.6fd3 DYNAMIC ge1 1
1 0006.5ba3.67d6 DYNAMIC ge1 1
5 0006.5bb2.6589 DYNAMIC ge8 1
5 0006.5bdd.6c69 DYNAMIC ge8 1
5 0008.749c.101a DYNAMIC ge8 1
5 0008.74a2.04c2 DYNAMIC ge8 1
5 0008.74cb.5fc6 DYNAMIC ge8 1
5 0008.74d3.f02c DYNAMIC ge8 1
10 0008.74dd.87f7 DYNAMIC ge12 1
10 0008.74df.29d8 DYNAMIC ge12 1
(switch3)#