HP LaserJet 4345 Multifunction Printer series - Manual (Page 79)

Item Options Values Explanation
PAPER PATH TEST PRINT TEST PAGE Generates a test page
that is useful for
testing the paper
handling features of
the MFP.
Specifies which paper
paths are tested.
SOURCE ALL TRAYS
TRAY 1
TRAY 2*
TRAY
Specifies to print a test
page from a specific
tray or from all trays.
DESTINATION ALL BINS
OUTPUT BIN 1*
OUTPUT BIN 2
OUTPUT BIN 3
Specify which output
bin to use during the
paper path test.
DUPLEX ON
OFF*
Specifies if the
duplexer is included
when the test is
performed.
COPIES 1*
10
50
100
500
Specifies how many
sheets of paper from
the specified source
are sent when the test
is performed.
MANUAL SENSOR
TEST Tests the paper path
sensors and switches
for correct operation.
During this test, the
MFP is offline.
On the control-panel
display, each sensor is
represented by a
string of alphabetic
letters followed by a
corresponding status
for each sensor.
COMPONENT TEST List of MFP
components This menu item is
used by a service
technician to exercise
individual parts of the
MFP to isolate the
source of any problems.
ENWW Diagnostics menu 65