HP LaserJet 4345 Multifunction Printer series - Manual (Page 209)

7. If a jam message persists, jammed media is still in the MFP. Look for the jam in another
location.
Clearing jams from the fuser
Use this procedure to clear jams that occur in the fuser.
To clear jams from the fuser
1. Turn the MFP off and wait 30 minutes for the fuser to cool.
WARNING! The fuser is very hot. To avoid minor burns, wait 30 minutes for the fuser to cool before
removing it from the MFP.
2. If you are using the standard output bin, grasp the handle at the bottom of the output-bin
assembly, and pull it out and then up to remove it.
3. If you are using a 3-bin mailbox or a stapler/stacker, remove any media that is stacked,
and then press and hold the release button on the top of the device. Pull the device
away from the MFP.
4. Remove the optional duplexer or the duplex cover.
5. If you cannot see the jammed media inside the fuser, skip to step 9.
ENWW Clearing jams 195