HP LaserJet 4345 Multifunction Printer series - Manual (Page 55)

Item Values Explanation
DENSITY 0 to 8 Specifies the contrast and
brightness of the image. You
can choose from nine
increments.
0=darkest
8=lightest
Copying submenu
To gain access to this menu, touch CONFIGURE DEVICE, and then touch COPYING.
Item Values Explanation
NUMBER OF SIDES 1*
2
Indicates whether images should be
printed on one side or both sides of the
copy.
COLLATE ON*
OFF
Indicates whether copies should be
collated or not collated.
PAPER DESTINATION OUTPUT BIN 1*
OUTPUT BIN 2
OUTPUT BIN 3
Select the output bin on the optional
3-bin mailbox.
Note
This item appears only if an optional
3-bin mailbox is installed.
COPIES 1-999 Indicates the number of copies made
when you press
S TART without
selecting the number of copies by
using the numeric keypad.
FIRST COPY SPEED NO EARLY
WARM UP*
EARLY WARM
UP
Select NO EARLY WARM UP to
disable the Fast First Copy feature.
Using the Fast First Copy feature can
cause excessive wear on the MFP.
This is the default setting.
Select EARLY WARM UP to enable
the Fast First Copy feature, which
decreases the time that the MFP
requires to make a copy when it has
been idle for awhile.
STAPLE NONE*
CORNER
To enable stapling, select CORNER.
Note
This item is available only if the stapler/
stacker is installed.
Enhancement submenu
To gain access to this menu, touch CONFIGURE DEVICE, and then touch ENHANCEMENT.
ENWW Configure device menu 41