HP LaserJet 4345 Multifunction Printer series - Manual (Page 117)

12. Use the numeric keypad to type the number of copies, and then press S
TART
.
Copying by using the scanner glass
Use the scanner glass to copy small, lightweight (less than 60 g/m 2 or 16 lb), or irregularly-
sized originals such as receipts, newspaper clippings, photographs, or old or worn
documents.
1. Place the document face-down on the scanner glass.
2. Make any image modifications, and select any copy settings, if necessary.
3. If you are making only one copy, press S
TART
. If you are making multiple copies, use the
numeric keypad to type the number of copies (up to 999), and then press S
TART
to begin
copying. If you are copying more than one page from the scanner glass, see Using Job
Mode to make a multi-page copy job.
Copying by using the ADF
Use the ADF to make as many as 999 copies of a document that has up to 50 pages
(depending on the thickness of the pages).
1. Load the document face-up in the ADF.
2. Make any image modifications, and select any copy settings.
3. If you are making only one copy, press S
TART
. If you are making multiple copies, use the
numeric keypad to type the required number of copies, and then press S
TART
.
The ADF can distinguish between letter- and legal-sized original documents. If the document
that you are copying has mixed sizes, specify Mixed Originals in the Describe Original
settings. Copying is slower when using this feature.
Using Job Mode
Use the Job Mode feature to build a single copy job from multiple scans. You can use either
the ADF or the scanner glass. The settings for the first scan are used for subsequent scans.
1. Touch Copy.
2. Touch Describe Original.
3. Touch Advanced.
4. In the Job Mode check box, touch On.
5. Select any output settings, if necessary
6. After each page is scanned, the control panel prompts you for more pages.
7. Do one of the following:
If the job contains more pages, load the next page, and then press S
TART
.
If the job contains no more pages, touch Finished to print.
Note In Job Mode, if you scan the first page of a document by using the ADF, then you must scan
all of the pages in that document by using the ADF. If you scan the first page of a document
by using the scanner glass, then you must scan all of the pages in that document by using
the scanner glass.
ENWW Basic copying instructions 103