HP LaserJet 4345 Multifunction Printer series - Manual (Page 74)

Item Options Values Explanation
TCP/IP DEFAULT IP AUTO IP
LEGACY
AUTO IP: A link-local IP address
169.254.x.x will be set.
LEGACY: The address 192.0.0.192
will be set, consistent with older
Jetdirect products.
PRIMARY DNS Specify the IP address (n.n.n.n) of the
Primary Domain Name System (DNS)
Server.
SECONDARY
DNS Specify the IP address (n.n.n.n) of the
Secondary Domain Name System
(DNS) Server.
PROXY SERVER Specifies the proxy server to be used
by embedded software in your MFP. A
proxy server is typically used by
network clients for Internet access. It
caches Web pages, and provides a
degree of Internet security, for those
clients.
To specify a proxy server, enter its IP
address or fully-qualified domain
name. The name can be up to 64
characters.
For some networks, you might need to
contact your Independent Service
Provider (ISP) for the proxy server
address.
PROXY PORT Enter the port number used by the
proxy server for client support. The
port number identifies the port
reserved for proxy activity on your
network, and can be a value from 0 to
65535.
IPX/SPX ENABLE ON
OFF
ON: Enable the IPX/SPX protocol.
OFF: Disable the IPX/SPX protocol.
FRAME TYPE AUTO
EN_8023EN_IIEN
_8022EN_SNAP
Select the frame-type setting for your
network.
AUTO: (default) Automatically sets
and limits the frame type to the first
one detected.
EN_8023EN_IIEN_8022EN_SNAP:
Frame type selections for Ethernet
networks.
APPLETALK ENABLE ON
OFF
Enable or disable the AppleTalk
protocol.
DLC/LLC ENABLE ON
OFF
Enable or disable the DLC/LLC
protocol.
60 Chapter 2 Using the control panel ENWW