HP LaserJet 4345 Multifunction Printer series User Manual
Page 223
Control panel message
Description
Recommended action
68.X PERMANENT STORAGE
WRITE FAIL To continue touch OK
The MFP NVRAM is failing to write.
Printing can continue, but some
unexpected functions might occur if an
error occurred in permanent storage.
Touch OK to clear the message. If the
message is not cleared, turn the MFP
off, and then turn the MFP on.
If this message persists, contact an HP-
authorized service or support provider.
(See the HP support flyer, or go to
68.X STORAGE ERROR
SETTINGS CHANGED To
continue touch OK
One or more MFP settings are invalid
and have been reset to the factory-
default settings. Printing can continue,
but some unexpected functions might
occur if an error occurred in permanent
storage.
Touch OK to clear the message. If the
message is not cleared, turn the MFP
off, and then turn the MFP on.
If this message persists, contact an HP-
authorized service or support provider.
(See the HP support flyer, or go to
69.X ERROR To continue turn off
then on
A temporary printing error occurred.
Turn the MFP off, and then turn the MFP
on.
If this message persists, contact an HP-
authorized service or support provider.
(See the HP support flyer, or go to
79 ERROR To continue turn off
then on
A critical hardware error occurred.
Turn the MFP off, and then turn the MFP
on.
If this message persists, contact an HP-
authorized service or support provider.
(See the HP support flyer, or go to
8X.YYYY EIO ERROR
The EIO accessory card has
encountered a critical error, as specified
by YYYY.
Try the following actions to clear the
message.
1.
Turn the MFP off, and then turn the
MFP on.
2.
Turn the MFP off, reseat the EIO
accessory, and then turn the MFP on.
3.
Replace the EIO accessory.
8X.YYYY INTERNAL JETDIRECT
ERROR
The embedded HP Jetdirect print server
has encountered a critical error, as
specified by YYYY.
Turn the MFP off, and then turn the MFP
on.
If this message persists, contact an HP-
authorized service or support provider.
(See the HP support flyer, or go to
Access denied MENUS LOCKED
The control panel function that you are
trying to use has been locked to prevent
unauthorized access.
Contact the network administrator.
ACTION NOT CURRENTLY
AVAILABLE FOR TRAY X TRAY
SIZE CANNOT BE ANY SIZE/ANY
CUSTOM
A duplexed (2-sided) document was
requested from a tray that is set to ANY
SIZE or ANY CUSTOM. Duplexing is not
allowed from a tray configured to ANY
SIZE or ANY CUSTOM.
Select another tray or reconfigure the
tray.
Control-panel messages (continued)
ENWW
Resolving control-panel messages
209