beautypg.com

Installing eio cards, To install eio cards – HP LaserJet 4345 Multifunction Printer series User Manual

Page 298

background image

Installing EIO cards

Follow this procedure to install an EIO card.

To install EIO cards

1. Turn off the MFP, and disconnect all of the cables.

2. Remove the two screws and cover plate from the EIO slot on the left side of the MFP.

Note

Do not discard the screws or the cover plate. Save them for future use if you remove the EIO
card.

3. Install the EIO card in the EIO slot and tighten the screws.

4. Reconnect all the cables, and turn on the MFP.

5. Print a configuration page to verify that the EIO card was successfully installed. See

Checking the MFP configuration

.

284

Appendix E MFP memory and expansion

ENWW