HP LaserJet 4345 Multifunction Printer series - Manual (Page 133)

5. Open the formatter door.
6. Remove the fax accessory from its antistatic pouch.
CAUTION The fax accessory contains parts that are sensitive to electrostatic discharge (ESD). When
removing the fax accessory from its antistatic pouch and while installing it, use static
protection, such as a grounding wrist strap that is connected to the metal frame of the MFP,
or touch the metal frame of the MFP with your other hand.
7. Align the two cutouts on the fax accessory with the two fax-accessory guides, and
carefully slide the fax accessory into the guides.
8. Push the fax accesssory into place, and make sure that the fax accessory is securely
connected to the formatter.
9. Close the formatter door.
ENWW Analog faxing 119