HP LaserJet 4345 Multifunction Printer series - Manual (Page 75)

Item Options Values Explanation
LINK SPEED AUTO
10T HALF
10T FULL
100TX HALF
100TX FULL
The print server will automatically
configure itself to match the network
link speed and communication mode.
If this process fails, 100TX HALF is set.
10T HALF: 10 Mbps, half-duplex
operation.
10T FULL: 10 Mbps, full-duplex
operation.
100TX HALF: 100 Mbps, half-duplex
operation.
100TX FULL: 100 Mbps, full-duplex
operation.
Resets submenu
To gain access to this menu, touch CONFIGURE DEVICE, and then touch RESETS.
Note Use this menu with caution. You can lose buffered page data or MFP configuration settings
when you select these items. Reset the MFP only under the following circumstances:
● You want to restore the MFP default settings.
● Communication between the MFP and computer has been interrupted, and you are not
able to resolve the problem by any other method. See
Solving network connectivity
problems .
● You are having problems with a port.
The items in the Resets submenu will clear all memory in the MFP, while pressing the R
ESET
button clears only the current job.
Item Values Explanation
RESTORE FACTORY
SETTINGS No value to select This item restores all
control-panel settings to the
original factory settings.
CLEAR MAINTENANCE
MESSAGE No value to select Use this item to temporarily
clear the ORDER
MAINTENANCE KIT and
REPLACE MAINTENANCE
KIT warning messages. The
REPLACE MAINTENANCE
KIT message will reappear
periodically until you replace
the maintenance kit.
ENWW Configure device menu 61