HP LaserJet 4345 Multifunction Printer series - Manual (Page 103)

Setting the registration
Use the SET REGISTRATION feature to center the front and back images on a page that
has been duplexed (printed on both sides). This feature also allows edge-to-edge printing to
be set to within approximately 2 mm (0.08 inch) of all edges of the paper. Image placement
varies slightly for each input tray. The alignment procedure must be performed for each tray.
The administrator can use an internal tray-registration page to calibrate each tray.
To set the registration
1. Touch Menu.
2. Touch CONFIGURE DEVICE.
3. Touch PRINT QUALITY.
4. Touch SET REGISTRATION.
You can select a tray by specifying a source. The default source is tray 2. If you want to
set the registration for tray 2, go to step 7. Otherwise, proceed to the next step.
5. Touch SOURCE.
6. Touch the name of a tray. After you touch the name of the tray, the control-panel display
returns to the SET REGISTRATION menu.
7. Touch PRINT TEST PAGE.
8. Follow the instructions on the printed page.
ENWW Setting the registration 89