HP StorageWorks 2.32 Edge Switch - Manual (Page 71)

Edge Switch Element Manager user guide 71
Click Clear to clear the statistics counters to zero. When the confirmation dialog box appears,
click This port only or All ports on product, then click OK to clear the counters to 0.
An entry identifying when the statistics were cleared, and by whom, is saved in the Audit Log.
FRU List View
Display the FRU List in the main panel by clicking the FRU List tab on the Element Manager
window. This view displays information about all installed FRUs on the switch. All data is dynamic
and updates automatically as the software detects changes.
Figure 23 FRU List View
Information on the FRU List View for each FRU includes:
• FRU Name—Control Processor (CTP), Cooling Fan, and Power Supply Module. Note that the
CTP is an internal component, and if it fails completely the entire switch must be replaced. The
meanings of FRU acronyms are:
• CTP—CTP card
• FAN—Fan module
• PWR—Power supply
• Position—Slot position of FRU in the chassis relative to identical FRUs also installed in the
chassis.
• Status—Active or failed.
Active
displays always unless the FRU fails.
Failed
displays if the
FRU is not functional.
• Part Number—Part number of the FRU.