HP StorageWorks 2.32 Edge Switch - Manual (Page 123)

Edge Switch Element Manager user guide 123
• Identifier—Identifies the user making the change according to the source:
• Maintenance Port—No entry appears.
• HAFM—Includes
user@address
, where
user
is the Element Manager user name and
address
is the network address of the workstation (remote user workstation or HAFM
appliance).
• SNMP—Contains the network address of the SNMP management station.
• Fabric—No entry appears.
• Web Server—The Identifier column contains
user@address
. The
user
is the Web server
user name and
address
is the network address of the Web user.
• Fibre Channel Host—No entry appears.
• Telnet—Change was made through a telnet connection.
Event log
The Event Log provides a record of significant events that have occurred on the switch, such as
hardware failures, degraded operation, and port problems. To open the Event Log, select Logs >
Event Log.
Figure 54 Event Log
All detected firmware faults and hardware failures are sent to the HAFM appliance for recording in
the Event Log. The log provides a maximum of 1000 log entries before it wraps and overwrites the
oldest entries. For detailed information on event data and problem resolution, refer to the
appropriate service manual for your Edge Switch.
Each log entry includes the following:
• Date/Time—The date and time of the event on the switch.