HP StorageWorks 2.32 Edge Switch - Manual (Page 21)

Edge Switch Element Manager user guide 21
NOTE: The HAFM window is still available as a separate window. You can drag the Element
Manager window away from the other window and view both windows on your desktop, or you
can minimize one or both of them to icons, if desired. You can have a maximum of four Element
Manager windows open concurrently.
Opening the Online Help
Use the following steps to open the online help:
1. Open the Element Manager for the switch from the HAFM desktop, as described in ” Opening
the Element Manager ” on page 20.
2. Select Help > Contents or press F1.
Window layout and function
The main Element Manager window is divided into four main areas, as shown in Figure 3 on page
20: Menu bar, View tabs, View panel, and Status bar. You can use the features in these areas to
configure switch operation, monitor performance, and access maintenance features.
Menu bar
The menu bar on the Element Manager window contains the following menus:
• Product
• Configure Logs
• Maintenance
• Help
Click on the name of a menu to display a list of menu options. Select an option to open a dialog
box that allows you to perform configuration and maintenance tasks and to view logs.
If a menu option contains a check box, click in the box to add a check mark and enable a function.
Click a check box containing a check mark to remove the check mark and disable the function.
Product menu
Click one of the following options on the Product menu:
Management style
This option is available on the Edge Switch 2/32 only. It includes options:
• Open Systems—The management style that is used for open fabrics. Open Systems is the
default management style.
• FICON—The management style that is most useful when attaching to IBM S/390 Enterprise
Servers.