HP StorageWorks 2.32 Edge Switch - Manual (Page 170)

Information and error messages 170
Invalid UDP port number. The specified user datagram protocol
(UDP) port number is invalid. The
number must be an integer from 1
through 65535 inclusive.
Verify and enter a valid UDP port number.
Invalid World Wide Name. The specified World Wide Name
format is invalid. The valid format is
eight two-digit hexadecimal numbers
separated by colons (xx:xx:xx:xx:
xx:xx:xx:xx).
Enter a World Wide Name using the
correct format.
Invalid World Wide Name or
nickname.
The World Wide Name or nickname
that you have specified is invalid. The
valid format for the World Wide
Name is eight two-digit hexadecimal
numbers separated by colons
(xx:xx:xx:xx:xx: xx:xx:xx). The valid
format for a nickname is non blank
characters, up to 32 characters.
Try the operation again using a valid
World Wide Name or nickname.
Invalid World Wide Name. Valid
WWN format is: xx:xx:xx:xx:xx:
xx:xx:xx.
The specified World Wide Name
format is invalid. The valid format is
eight two-digit hexadecimal numbers
separated by colons (xx:xx:xx:xx:
xx:xx:xx:xx).
Retry the operation using a valid WWN or
nickname.
Invalid zone in zone set. The defined zone no longer exists
and is invalid.
Delete the invalid zone from the zone set.
Limit exceeded. You cannot add a new product or
user to HAFM application if the
maximum number of that resource
already exists on the system.
Delete unneeded products or users from
the system, before attempting to add any
new ones.
No address selected. You cannot complete the operation
because an address has not been
selected.
Select an address and retry the operation.
No attached nodes selected. An operation was attempted without
an attached node selected.
Select an attached node and try the
operation again.
No management server specified. An HAFM appliance is not defined to
the HAFM application.
At the HAFM 8 Log In dialog box, type an
appliance name in the Server Name field
and click Login.
No nickname selected. No nickname was selected when the
command was attempted.
Select a nickname and try again.
No Element Managers installed. No director or switch Element
Manager is installed on this
workstation.
Install the appropriate Element Manager to
this workstation.
No routing information available. No information is available for the
route selected.
Select a different route and try the
operation again.
No user selected. A user was not selected when the
command was attempted.
Select a user and try again.
Table 7 HAFM messages (continued)
Message Description Action