HP StorageWorks 2.32 Edge Switch - Manual (Page 150)

Optional features 150
9. If you are finished configuring the switch, back up the configuration data. For more information,
see ” Backing up and restoring configuration data ” on page 117.
FICON Management Server parameters
The following provides a detailed description of the parameters you can set when you configure
the FICON Management Server:
• Switch Clock Alert Mode—Click this check box to display a check mark and enable Clock
Alert Mode. If this is enabled, the following occurs when users set the date and time through the
Configure Date and Time dialog box (Configure menu):
• If you enable Periodic Date/Time Synchronization, an error message appears,
indicating that clock alert mode must be cleared to enable automatic synchronization of the
date and time.
• If you manually set the date and time (Periodic Date/Time Synchronization is not
enabled), a confirmation dialog box will display. You must click OK on that dialog box to
continue manual configuration.
• Host Control Prohibited—Click this check box to display a check mark and prohibit a host
management program from changing configuration and connectivity parameters on the switch.
In this case, the host program will only have read authorization and cannot make changes.
When the check mark is not displayed, a host program can change configuration and
connectivity parameters on the switch.
• Programmed offline state control—Click this check box to display a check mark and
enable a host management program to control the switch’s offline and online state. When a
check mark is not displayed, a host program cannot set the switch online or offline.
• Code Page—Use this option to set the language required for the port name that appears on
the Management Server. Language support is provided through character set 697 for all
Extended Binary-Coded Decimal Interchange Code (EBCDIC) pages.
When planning the installation, choose the EBCDIC code page for displaying host-assigned
port names or the CUP name. As an example, if the code page for Italy is selected and a port
name is assigned in Italian by the host management program, the Italian language port name
appears in the Element Manager.
The drop-down list displays the code pages that are available for configuration. The default
code page is United States/Canada 00037. Refer to Table 6 for other code pages.
Table 6 Available code pages
Code page name Code page Hexadecimal CPGID
United States/Canada 00037 0025
Germany/Austria 00273 0111
Brazil 00275 0113
Italy 00280 0118
Japan 00281 0119
Spain/Latin America 00284 011C