HP StorageWorks 2.32 Edge Switch - Manual (Page 174)

Information and error messages 174
This network address has already
been assigned.
The specified IP address was
assigned and configured. A unique
address must be assigned.
Consult with the customer’s network
administrator to determine a new IP
address to be assigned and configured.
This product is not managed by this
management server.
The product selected is not managed
by this HAFM appliance.
Select a product managed by this HAFM
appliance or go to the HAFM appliance
that manages the affected product.
This switch is currently part of this
fabric and cannot be removed from
the Fabric Membership List. Isolate
the switch from the fabric prior to
removing it from the Fabric
Membership List.
You attempted to remove a switch
from the Fabric Membership List
using the Fabric Binding option, but
the switch is still part of the fabric.
Remove the switch from the fabric by
setting the switch offline or blocking the
E_Port where the switch is connected.
This World Wide Name was not
accepted. The World Wide Name
and Domain ID must be unique in
the Fabric Membership List.
You attempted to add a detached
switch to the Fabric Membership List
through the Fabric Binding option
(SANtegrity Binding feature), but an
entry already exists in the Fabric
Membership List with the same
World Wide Name (WWN).
Enter a unique World Wide Name for the
switch in the Add Detached Switch dialog
box.
Too many members defined. The maximum number of zone
members that can be defined was
reached. Delete an existing zone member before
adding a new zone member.
You do not have a compatible
version of the management server
software. In order for the HAFM
application to function properly, a
compatible version must be
installed on the client machine.
Click OK to install a compatible
version. The HAFM application version
running on the HAFM appliance
differs from the version running on
the remote workstation (client). A
compatible version must be
downloaded from the HAFM
appliance. Download a compatible version of the
HAFM application to the remote
workstation (client) using the Web install
procedure.
You do not have rights to perform
this action. Configured user rights do not allow
this operation to be performed. Verify user rights with the customer’s
network administrator and change as
required using the Configure Users dialog
box.
You must define an SMTP server
address. An SMTP server address must be
defined and configured for e-mail to
be activated. Define the SMTP server address at the
Configure E-Mail dialog box.
You must define at least one E-mail
address. At least one e-mail address must be
defined and configured for e-mail to
be activated. Define an e-mail address at the Configure
E-Mail dialog box.
Table 7 HAFM messages (continued)
Message Description Action