Activating or deactivating alerts, Viewing alerts, Deleting alerts – HP StorageWorks 2.32 Edge Switch User Manual
Page 115: Configuring open trunking, Exporting the configuration report, Ocedures in, Viewing, Alerts
Edge Switch Element Manager user guide 115
Activating or deactivating alerts
Use the following steps to activate or deactivate existing threshold alerts. In the active state,
notifications are generated for the alert. In the inactive state, notifications do not occur.
1.
Select Configure > Threshold Alerts from the menu.
The Configure Threshold Alerts dialog box appears. The port’s current state,
Inactive
or
Active
, is listed in the State column.
2.
To change the state, select the alert information in the table.
3.
If the alert is active, click Deactivate to change to the inactive state. If the alert is inactive,
click Activate to change to the active state.
Viewing alerts
Use the following steps to view existing threshold alerts.
1.
Select Configure > Threshold Alerts. The Configure Threshold Alerts dialog box appears.
2.
Select the alert that you want to view by selecting the alert information in the table.
3.
Click View. The View Threshold Alerts dialog box appears, describing the threshold alert and
the ports to which the alert has been applied.
Deleting alerts
Use the following steps to delete existing threshold alerts.
1.
Select Configure > Threshold Alerts. The Configure Threshold Alerts dialog box appears.
2.
Select the alert that you want to delete by selecting the alert information in the table.
3.
Click Delete. A message asking you to confirm the deletion displays.
4.
Click Yes. The alert is removed from the dialog box.
Configuring Open Trunking
This option is only available if the optional Open Trunking feature is installed and the firmware is
version 06.01.00 or higher. Choosing this option opens the Configure Open Trunking dialog box.
For details on enabling Open Trunking and configuring such parameters as congestion thresholds
for ports, event notification options, and the Low BB Credit Threshold, see ”
Exporting the Configuration Report
The Export Configuration Report dialog box enables you to create an ASCII file of all saved
configuration data in the switch’s NV_RAM. The file is saved to your hard drive or a diskette. Use
any program that can read ASCII text to import this file for viewing or printing.
The Export Configuration Report dialog box is available on the Configuration menu.
NOTE:
This file cannot be used to set configuration parameters through the Element Manager.