GW Instek GSP-930 User Manual - Manual (Page 95)

BASIC OPERATION
93
Peak Search
Move Marker to Peak
Description The Peak
Search
key is used to find trace peaks.
Operation 1. Press
Marker
> Select Marker[F1] and select a
marker number.
2. Press Peak
Search
>Peak Search[F1]. The marker will
move to the highest signal peak.
3. To continually search for the peak each sweep,
press, Peak
Search
>More 1/2[F7]>Peak Track[F1] and
set Peak Track to on.
Move Marker and Peak to Center
Description The Center function moves the marker to the
highest signal peak and moves the center
frequency to that peak.
Operation 1. Press
Marker
> Select Marker[F1] and select a
marker number.
2. Press Peak
Search
>Mkr>Center[F2].
Note
The span will not be changed.