beautypg.com

Using the gated sweep mode – GW Instek GSP-930 User Manual User Manual

Page 72

background image

GSP-930 User Manual

70

Using the Gated Sweep Mode

Connection

1. Connect a trigger signal (3.3v CMOS) to the

GATE IN port on the rear panel.

Trigger

Operation

1. Press

Sweep

> GateDelay[F5] and set the gate

delay time.

2. Press

Sweep

> Gated Length[F6] and set the gate

time length.

3. Press

Sweep

> Gated Sweep[F4] and turn the

mode on.

Gate Delay:
Gate Length:

0s ~ 1000s
10us ~ 1000s

Display Icon

The Sweep Gated icon is displayed when
Gated Sweep is turned on.

See also other documents in the category GW Instek Equipment: