GW Instek GSP-930 User Manual - Manual (Page 57)

BASIC OPERATION
55
Deactivate
Correction 1. Press
Amplitude
> More[F7]>Correction[F3]>
Correction[F2] to turn correction back off.
Delete Correction Set
Operation 1. Press
Amplitude
> More[F7]>Correction[F3]>
Correction Set[F1] and choose the correction set
to delete.
Correction Set: 1~5
2. Press Delete Correction[F6].
The selected correction set will be deleted.
Save Correction Set To Memory
Operation 1. Press
Save
> Save To[F1] and choose the save
location.
Location: Register, Local, USB, SD
2. Press Type[F2]> Correction[F5].
3. Press Data Source[F3] and choose a correction.
Correction Set: Correction 1~5
4. Press Save Now[F7].
5. The correction set will be saved to the selected
location. For more information on Save and
Recall, please see page 170.