GW Instek GSP-930 User Manual - Manual (Page 88)

GSP-930 User Manual
86
Move Marker Manually
Operation 1. Press
Marker
> Select Marker[F1] and select a
marker number.
2. Use the left/right arrow keys to
move the marker one grid division.
3. Use the scroll wheel to move the
marker in fine increments.
4. Alternatively, the numeric keypad
can be used to directly enter the
frequency of the marker position.
7 8 9
6 5 4
1 2 3
/ 0
Move Marker to Preset Locations
Description The
Marker-> key is used to move the selected
marker to a number of preset positions.
Functions Mkr>Center:
Mkr>Start:
Mkr>Stop:
Mkr>CF Step:
Mkr>Ref Lvl: Move to center frequency.
Move to start frequency.
Move to stop frequency.
Move to step frequency.
Move to reference level
amplitude.
Note
When the
Marker->
key is used, the span and other
settings may be automatically changed.
Operation 1. Press
Marker
> Select Marker[F1] and select a
marker number.
2. Press
Marker-> and select a marker position: