beautypg.com

Center frequency step – GW Instek GSP-930 User Manual User Manual

Page 43

background image

BASIC OPERATION

41

Center Frequency Step

Description

The CF Step function sets the step size of the
center frequency when using the arrow keys.

When the arrow keys are used to alter the
center frequency, each press will move the
center frequency by the step size specified by
the CF Step function.

In auto mode, the center frequency step size is
equal to 10% (1 division) of the span.

Operation

1. Press

Frequency

> CF Step[F4] and set the CF Step to

Auto or Man.

2. If Man was selected, set the frequency and unit

of the center frequency step size.

Manual Range:
Auto range:

100Hz~3GHz
1/10 of span frequency

Display

CF Step size