GW Instek GSP-930 User Manual - Manual (Page 50)

GSP-930 User Manual
48
Scale/Div
Description Sets the logarithmic units for the vertical
divisions when the scale is set to Log.
Operation 1. Press
Amplitude
> Scale/Div[F3] repeatedly to select
the vertical division units.
Unit Range: 10, 5, 2, 1
Display
Scale
Note
The Scale/Div function is only selectable when the
scale is set to Log (logarithmic).
Scale Type
Description Sets the vertical scale in linear or logarithmic
units.
By default the linear scale is set to volts and the
logarithmic scale is set to dBm.
Operation 1. Press
Amplitude
> Scale Type[F4] and set the vertical
scale to Log or Lin.
Note
If the unit scale is changed (i.e. dBm → volts), the
displayed vertical scale type will remain in the set
linear or logarithmic setting.