GW Instek GSP-930 User Manual - Manual (Page 169)

ADVANCED OPERATION
167
Add Delay to
Sequence The delay function adds a delay between steps.
1. Press Delay Time[F2]> and enter the delay time.
Range: 100ms ~ 10s
2. Press
Enter
to add the delay time to the
sequence editor.
 The delay time will be inserted as a step.
Note
The arrow keys can be used to move the cursor to
the desired step.
Pause Sequence The Wait to Go function is used to pause a
sequence until Continue[F1] is pressed. This is
useful for observing measurements before
moving onto the next step.
1. Press Wait to Go[F3]>
Enter
.
 Wait to Go will be inserted as a step.
2. When a sequence is running, Press Continue[F1]
to resume running the sequence.