GW Instek GSP-930 User Manual - Manual (Page 162)

GSP-930 User Manual
160
Spectrum display
Limit Line Table
3. Press Point Num[F1] and choose a point number
to edit (must start at #1).
4. Press Frequency[F2] and set the frequency of the
first point.
5. Press Limit[F3] and set the amplitude level of
the point.
All the points will be displayed in a limit line
table at the bottom of the display.
6. Repeat steps 3-5 for the remaining points (max
10).
7. To delete the selected point, press Delete
Point[F6].
8. Press Return[F7]>Save Save Limit Line[F5] to
save the currently selected limit line.
Note
Note that the limit lines are automatically sorted by
frequency (low → high).