GW Instek GSP-930 User Manual - Manual (Page 54)

GSP-930 User Manual
52
Display
Correction points
Original waveform
Corrected
output
Example: The diagram above shows how amplitude
correction is used to compensate for any losses or
gains at specific frequencies.
Create a Correction Set
Description The GSP-930 can create and edit up to 5 sets of
correction points. The correction points and
associated values are all tabulated for ease of
use.
Operation 1. Press
Amplitude
> More[F7]>Correction[F3]>
Correction Set[F1] and choose a correction set to
edit/create.
Correction set: 1~5