GW Instek GSP-930 User Manual - Manual (Page 179)

ADVANCED OPERATION
177
Press
Enter
to confirm setting the filename.
Note
If the file name is not user-defined, a file name will
be automatically created in the following format:
File name: type_data source_file number.file
extension
The file number parameter is incremented each
time the same file type is created.
9. To start recording power meter measurements,
press Record Now[F3] .
A message “SaveFinish‼” will be displayed at the
bottom of the screen when the recording has
finished.
Stop Recording To manually stop the recording, press Record
Stop[F2].